Sunday, June 14, 2015

Turning Samsung galaxy note 4 (SM-N910F) into a mobile pc - Part 2 - constructing

After beign bussy the last weeks, i finally got time to build the hardware keyboard case for galaxy note 4.
Building a sliding keyboard mechanism from ground was hard enough, but what was really challenging, was to also make the keyboard tilt.
So the first thing was to find the best case for this, which in this case is the ringke slim:

I ordered two of them: one for the phone and one for the keyboard
The second step was getting the rii bluetooth keyboard, which fortunately is about the same size as the galaxy note 4 is.

Next i removed all the unnecessary components from the keyboard:

That included the laser pointer and the thickness of the plastic case, also instead of that mini usb port used to charge the keyboard battery, i installed a micro-usb port , so i can use the same charger for phone and keyboard. Instead of the laser pointer i inserted a LED flaslight.
I made the slide mechanism form a pc power source case, which i cuted and bended:

The tilt mechanism i maded from the cases of two old ericsson flip phones. I cuted the lower part of the cases right where the flip was:

Next i glued the cuted parts of the ericsson phones in the ringke case:

Then i sticked the rii keyboard case in the assembly:

As you can see in the above picture, there is some free space in the top left corner of the case, there i glued a small plastic piece which will be the housing of the usb host adapter.
After that i made some cuts in the second ringke case (where the phone will be placed):

Those cuts are to make room for the screws heads that will hold the silde mechanism.
In order to close the holes left on the case where the qwerty keyboard is placed i ordered 3d carbon film:

I wrapped the two cases in the this film, and that was the final step.

Here are some pictures of the complete device:

The usb host case is really small, so i had to cut the cable of a usb host adapter, in order to make it as small as possible:

A photo of the flashlight from the keyboard

And a video to see in action:

And here are a few photo of the device compared to other older devices:

Psion series 3a and galaxy note 4

Psion series 5mx, psion series 3a and note 4

note 4 and nokia n97

 note 4 and hp jornada 720

note 4 and nokia n900

note 4 and nokia n900

note 4, htc x9500 and nokia n900

htc x9500 and note 4

htc x9500 and note 4

htc x9500 running windows 10 and note 4 emulating windows xp

htc x9500 running windows xp and snote 4 emulating windows xp

note 4 and nokia n900 web browsing

note 4 and nokia n900 web browsing

In the building process i forgot to photo every single step i did like making the small usb case, adding two small off/on switches for the bluetooth keybord and the flash light, But if i will build anothe case, i will photo all steps.
In the third part (the usage) i will show how this is used for fast typing and gaming.